This is a simple wire tester all you need is a 12-1000vac non-contact voltage detector. The ideal is to connect AC live wire to the red circle is. You do not use ground or neutral wires, these wires should be cut off. If the cord is shielded(coax) the detector doesn’t. Even though there’s only one …
Tag Archives: high voltage
Simple Plasma Speaker/HV Power Supply
This circuit takes 3.7vdc and converts it to about 18kv. The transistor is used for the plasma speaker. It’s basically a Single-Ended Class A Audio Amplifier. The 500-ohm pot adjusts the voltage sent to the converter. The pot must NOT go over 500 ohms because then the voltage could be too high. The circuit is …
Circuit Simulator